About Allendale Police Frequencies
Quick answer: County-level dispatch that covers Allendale: Wabash County Sheriff 151.1000 MHz, narrow FM, 77.0 PL.
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Wabash County channels that also cover Allendale
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wabash County Sheriff | Back-Up | 151.1000 In 155.9850 | 77.0 PL | FMN | WPNX612 |
| Wabash County Sheriff | Wabash County Sheriff – Dispatch / Mt Carmel Police (911) | 151.1000 In 155.9850 | NAC 168 | P25 | WPNX612 |
Nearest trunked radio sites
Distances are measured from the center of Allendale.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Allendale?
We do not have a dispatch channel listed specifically for Allendale. The county sheriff's dispatch channels in the same county: Wabash County Sheriff 151.1000 MHz, narrow FM, 77.0 PL.
What scanner do I need to listen to police in Allendale?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Allendale?
For Allendale, start with the Mt. Carmel site of STARCOM21 Statewide Illinois. Its control channels are 852.375, 852.9 MHz. Program a control channel first; the scanner finds the voice channels from it.