Skip to content

Gilboa Police Frequencies

We do not have frequencies listed specifically for Gilboa in Benton County, Indiana yet. Countywide channels for Benton County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Fowler (Indiana Project Hoosier SAFE-T), about 11 miles away.

About Gilboa Police Frequencies

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry law-enforcement traffic here: Indiana Project Hoosier SAFE-T: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Gilboa, start with the Fowler site of Indiana Project Hoosier SAFE-T, about 11 miles away. Its control channels: 852.4375, 853.4875 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Benton County channels that also cover Gilboa

Dispatch

Dispatch frequencies for Benton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
County Public Safety Backupto P25 TRS (CSQ CWID)857.2125
In 812.2125
P25WSJF446

Tactical

Tactical frequencies for Benton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
County Public SafetyOperations (low use)155.4900FMNKSD428

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Benton County SheriffBenton County Sheriff – Dispatch (County)100172721D
Benton County SheriffCounty Jail – Operations100232727D
1 encrypted talkgroup (cannot be monitored)
Indiana Project Hoosier SAFE-T encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Benton County SheriffSecure Dispatch (County)100242728D Encrypted

Nearest trunked radio sites

Distances are measured from the center of Gilboa.

Fowler · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 64 (hex 40) · NAC 6B4 · about 11 mi away
Control 852.4375, 853.4875
Voice 851.4375, 851.9625, 856.4375
Monon · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 18 (hex 12) · NAC 6BF · about 13 mi away
Control 858.9625, 859.9625
Voice 851.475, 853.8625, 855.9625, 856.9625, 857.9625, 858.5125
West Lafayette · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 24 (hex 18) · NAC 6B4 · about 20 mi away
Control 858.7125, 859.7125
Voice 851.3875, 852.3875, 852.8875, 854.3125, 856.4375, 856.7125, 857.7125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.