Skip to content

Parish Grove Police Frequencies

We do not have frequencies listed specifically for Parish Grove in Benton County, Indiana yet. Countywide channels for Benton County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Fowler (Indiana Project Hoosier SAFE-T), about 5 miles away.

About Parish Grove Police Frequencies

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry law-enforcement traffic here: Indiana Project Hoosier SAFE-T: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Parish Grove, start with the Fowler site of Indiana Project Hoosier SAFE-T, about 5 miles away. Its control channels: 852.4375, 853.4875 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Benton County channels that also cover Parish Grove

Dispatch

AgencyDescriptionFrequency (MHz)ToneModeFCC
County Public Safety Backupto P25 TRS (CSQ CWID)857.2125
In 812.2125
P25WSJF446

Tactical

AgencyDescriptionFrequency (MHz)ToneModeFCC
County Public SafetyOperations (low use)155.4900FMNKSD428

Indiana Project Hoosier SAFE-T

AgencyDescriptionTalkgroupHexMode
Benton County SheriffBenton County Sheriff – Dispatch (County)100172721D
Benton County SheriffCounty Jail – Operations100232727D
1 encrypted talkgroup (cannot be monitored)
AgencyDescriptionTalkgroupHexMode
Benton County SheriffSecure Dispatch (County)100242728D

Nearest trunked radio sites

Distances are measured from the center of Parish Grove.

Fowler · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 64 (hex 40) · NAC 6B4 · about 5 mi away
Control 852.4375, 853.4875
Voice 851.4375, 851.9625, 856.4375
Morocco · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 63 (hex 3F) · NAC 6B3 · about 24 mi away
Control 852.95, 853.95
Voice 851.95, 852.45
Attica · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 67 (hex 43) · NAC 6B8 · about 25 mi away
Control 853.4375, 853.9375
Voice 851.4125, 851.9125, 852.9125, 856.2375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.