About Adams Police Frequencies
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry law-enforcement traffic here: Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Adams, start with the Peru site of Indiana Project Hoosier SAFE-T, about 9 miles away. Its control channels: 853.45, 853.975 MHz.
Cass County channels that also cover Adams
Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cass County Sheriff | Operations | 154.7700 | FMN | WPWS755 |
Jails & Corrections
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Indiana FSSA State Hospital - Logansport | Operations | 860.2375 In 815.2375 | 072 DPL | FMN | WPIQ344 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Cass County Sheriff | Cass County Sheriff – Dispatch | 10057 | 2749 | D |
| Cass County Sheriff | Operations | 10059 | 274b | D |
| Cass County Sheriff | Operations | 10060 | 274c | D |
| Cass County Sheriff | Operations | 10061 | 274d | D |
Nearest trunked radio sites
Distances are measured from the center of Adams.
Peru · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 21 (hex 15) · NAC 6BA · about 9 mi away
Control 853.45, 853.975
Voice 851.375, 851.4, 851.9, 852.425
Logansport · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 57 (hex 39) · NAC 6B7 · about 10 mi away
Control 857.4875, 859.2125
Voice 851.9875, 852.9, 853.4875, 858.9375
Rochester · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 48 (hex 30) · NAC 6BC · about 12 mi away
Control 853.4, 855.4875
Voice 851.4, 852.4
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.