About Center Police Frequencies
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry law-enforcement traffic here: Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Center, start with the Frankfort site of Indiana Project Hoosier SAFE-T, about 1 miles away. Its control channels: 854.2125, 854.4125 MHz.
Clinton County channels that also cover Center
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Clinton County Sheriff | Sheriff/Fire – Dispatch (Rebroadcast of SAFE-T) | 153.2900 | 365 DPL | FMN | WPPB519 |
| Clinton County Sheriff Backup | Clinton County Sheriff – Dispatch | 155.4150 In 156.1350 | 365 DPL | FMN | KY6425 |
Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Clinton County Sheriff Backup | Clinton County Sheriff – Tactical Channel | 156.2400 In 159.1050 | FMN | KDC973 | |
| Clinton County Sheriff Backup | Mobile Extenders | 158.9100 | FMN | KY6425 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Clinton County Sheriff | Clinton County Sheriff – Dispatch (Sheriff) | 10107 | 277b | D |
| Clinton County Sheriff | Investigations (County) | 10106 | 277a | D |
| Clinton County Sheriff | Talk-Around (County) | 10109 | 277d | D |
| Clinton County Sheriff | Jail Operations | 12563 | 3113 | D |
Nearest trunked radio sites
Distances are measured from the center of Center.
Frankfort · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 69 (hex 45) · NAC 6B9 · about 1 mi away
Control 854.2125, 854.4125
Voice 851.6625, 852.05, 853.25
Geetingsville · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 25 (hex 19) · NAC 6B5 · about 10 mi away
Control 852.95, 853.95
Voice 851.45, 851.95, 852.45, 856.7125
Boone Co Simulcast · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 3 (hex 3) · NAC 6B3 · about 16 mi away
Control 851.7375, 852.1625
Voice 851.2625, 851.4375, 852.525, 852.625, 853.175, 853.7375
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Center?
We do not have a dispatch channel listed specifically for Center. County-level dispatch channels in the same county: Clinton County Sheriff 153.2900 MHz (365 DPL).