Skip to content

Grant Police Frequencies

We do not have frequencies listed specifically for Grant in DeKalb County, Indiana yet. Countywide channels for DeKalb County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Auburn (Indiana Project Hoosier SAFE-T), about 4 miles away.

About Grant Police Frequencies

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry law-enforcement traffic here: Indiana Project Hoosier SAFE-T: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Grant, start with the Auburn site of Indiana Project Hoosier SAFE-T, about 4 miles away. Its control channels: 853.65, 853.8875 MHz.
  • 4 entries are marked expired, so they may no longer be in use.

DeKalb County channels that also cover Grant

Dispatch

Dispatch frequencies for DeKalb County
AgencyDescriptionFrequency (MHz)ToneModeFCC
DeKalb County Sheriff Expired: Expired 5/22DeKalb County Sheriff – Dispatch155.4900
In 154.9500
162.2 PLFMNKTY602

Tactical

Tactical frequencies for DeKalb County
AgencyDescriptionFrequency (MHz)ToneModeFCC
DeKalb County Sheriff Expired: Expired 5/22DeKalb County Sheriff – Tactical Channel460.6000
In 465.6000
FMNKTY602

Jails & Corrections

Jails & Corrections frequencies for DeKalb County
AgencyDescriptionFrequency (MHz)ToneModeFCC
DeKalb County Sheriff Expired: Expired 5/22Jail460.1500
In 465.1500
114.8 PLFMNKTY602
DeKalb County Sheriff Expired: Expired 5/22Jail460.4000
In 465.4000
100.0 PLFMNKTY602

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
DeKalb County SheriffDeKalb County Sheriff – Dispatch101312793D
DeKalb County SheriffOperations101132781D
DeKalb County SheriffJail Operations1271531abD

Nearest trunked radio sites

Distances are measured from the center of Grant.

Auburn · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 45 (hex 2D) · NAC 6B8 · about 4 mi away
Control 853.65, 853.8875
Voice 851.075, 852.3875, 852.925, 853.3625, 859.2625
Kendallville · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 20 (hex 14) · NAC 6BA · about 14 mi away
Control 853.9875, 857.2625
Voice 851.425, 851.9625, 852.475, 852.9
Steuben Co Simulcast · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 6 (hex 6) · NAC 6B6 · about 15 mi away
Control 852.975, 853.45
Voice 851.1625, 851.375, 851.9375, 853.1125, 853.9125, 856.2125, 857.2125, 858.2125, 859.2125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.