Skip to content

Franklin Police Frequencies

We do not have frequencies listed specifically for Franklin in Floyd County, Indiana yet. Countywide channels for Floyd County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Doolittle Hill (Indiana Project Hoosier SAFE-T), about 3 miles away.

About Franklin Police Frequencies

  • Trunked radio systems that carry law-enforcement traffic here: Indiana Project Hoosier SAFE-T: 11 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Franklin, start with the Doolittle Hill site of Indiana Project Hoosier SAFE-T, about 3 miles away. Its control channels: 771.70625 MHz.

Floyd County channels that also cover Franklin

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Floyd County SheriffFloyd County Sheriff – Dispatch2119452caD
Floyd County SheriffIndiana University Southeast Police – Dispatch2119852ceD
Floyd County SheriffOperations2119552cbD
Floyd County SheriffOperations2119652ccD
Floyd County SheriffOperations2119752cdD
Floyd County SheriffIndiana University Southeast Police – Operations2119952cfD
Floyd County SheriffAnimal Control2121152dbD
Floyd County SheriffCriminal Investigations Division2121252dcD
Floyd County SheriffSWAT Negotiations2121452deD
Floyd County SheriffSWAT Operations2121552dfD
Floyd County SheriffJail Operations/Transport2121352ddD

Nearest trunked radio sites

Distances are measured from the center of Franklin.

Doolittle Hill · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 83 (hex 53) · NAC 6B2 · about 3 mi away
Control 771.70625
Voice 770.03125, 770.55625, 771.15625, 771.45625
Georgetown · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 82 (hex 52) · about 6 mi away
Control 772.60625, 772.85625
Voice 769.11875, 772.10625, 772.35625
Floyds Knob · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 34 (hex 22) · NAC 6B3 · about 8 mi away
Control 853.4, 853.9, 854.1625, 854.4375
Voice 851.4, 852.4, 852.9
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.