About Linton Police Frequencies
- 2 conventional channels use a digital mode (NXDN48), which needs a scanner that decodes that mode.
- Trunked radio systems that carry law-enforcement traffic here: Indiana Project Hoosier SAFE-T: 1 talkgroup; Indiana Project Hoosier SAFE-T: 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Linton, start with the Linton site of Indiana Project Hoosier SAFE-T, about 1 miles away. Its control channels: 853.75, 859.7375 MHz.
- 2 listed entries are marked encrypted. No scanner can decode encrypted audio.
Linton conventional frequencies
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Linton Police | Linton Police – Dispatch | 151.0175 In 158.9850 | RAN 7 | NXDN48 Encrypted | KSD419 |
Linton trunked talkgroups
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Linton Police | Linton Police Dispatch | 21255 | 5307 | D |
Greene County channels that also cover Linton
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Greene County Sheriff | Greene County Sheriff – Dispatch | 154.8600 In 158.9700 | RAN 20 | NXDN48 Encrypted | KSE628 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Greene County Sheriff | County Law Enforcement Dispatch | 21256 | 5308 | D |
| Greene County Sheriff | County Law Enforcement Operations | 21267 | 5313 | D |
| Greene County Sheriff | County Law Enforcement Operations | 21268 | 5314 | D |
| Greene County Sheriff | County Law Enforcement Operations | 21269 | 5315 | D |
| Greene County Sheriff | County Law Enforcement Operations | 21270 | 5316 | D |
Nearest trunked radio sites
Distances are measured from the center of Linton.
Linton · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 61 (hex 3D) · NAC 6B6 · about 1 mi away
Control 853.75, 859.7375
Voice 851.975, 852.4625, 852.9625
Jasonville · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 34 (hex 22) · NAC 6B9 · about 10 mi away
Control 853.3875, 853.725, 853.8875
Voice 851.075, 851.3875, 852.4625, 852.9625
Paxton · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 86 (hex 56) · NAC 6BA · about 12 mi away
Control 852.9125, 853.4125
Voice 851.4125, 851.9125, 852.4125
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Linton?
Dispatch channels listed for Linton: Linton Police 151.0175 MHz (RAN 7).
Are Linton police talkgroups encrypted?
None of the 1 talkgroups listed for Linton are marked encrypted.