Skip to content

Liberty Police Frequencies

We do not have frequencies listed specifically for Liberty in Hendricks County, Indiana yet. Countywide channels for Hendricks County that may also cover this area are shown below when we have them. The closest trunked radio site we have is INDOC Plainfield (Indiana Project Hoosier SAFE-T), about 5 miles away.

About Liberty Police Frequencies

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry law-enforcement traffic here: Indiana Project Hoosier SAFE-T: 12 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Liberty, start with the INDOC Plainfield site of Indiana Project Hoosier SAFE-T, about 5 miles away. Its control channels: 771.53125, 771.78125 MHz.
  • 11 listed entries are marked encrypted. No scanner can decode encrypted audio.
  • 2 entries are marked expired, so they may no longer be in use.

Hendricks County channels that also cover Liberty

Dispatch

Dispatch frequencies for Hendricks County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hendricks County Sheriff Expired: Expired 6/14Central Dispatch154.8150
In 153.8450
110.9 PLFMNWQXR996

Jails & Corrections

Jails & Corrections frequencies for Hendricks County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hendricks County Sheriff Expired: Expired 6/14Hendricks County Sheriff – Corrections(FALLBACK) County Jail156.1350
In 153.9200
141.3 PLFMNWQAI396

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Hendricks County SheriffAnimal Control (County)103552873D
11 encrypted talkgroups (cannot be monitored)
Indiana Project Hoosier SAFE-T encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Hendricks County SheriffHendricks County Sheriff – Dispatch10346286aD Encrypted
Hendricks County SheriffHendricks County Sheriff – Dispatch (Secure)1271331a9D Encrypted
Hendricks County SheriffOperations (County)103412865D Encrypted
Hendricks County SheriffOperations (County)103452869D Encrypted
Hendricks County SheriffOperations (County)10347286bD Encrypted
Hendricks County SheriffDrug Task Force (County)103532871D Encrypted
Hendricks County SheriffOperations (County)10381288dD Encrypted
Hendricks County SheriffOperations (Secure) (County)1271231a8D Encrypted
Hendricks County SheriffCar-to-Car (County)103442868D Encrypted
Hendricks County SheriffCar-to-Car (County)1275331d1D Encrypted
Hendricks County SheriffJail – Operations (County)103522870D Encrypted

Nearest trunked radio sites

Distances are measured from the center of Liberty.

INDOC Plainfield · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 80 (hex 50) · NAC 6B0 · about 5 mi away
Control 771.53125, 771.78125
Voice 769.53125, 770.33125, 771.13125
Mooresville · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 16 (hex 10) · NAC 6BB · about 7 mi away
Control 852.975, 853.2, 853.475, 853.8625
Voice 851.325, 851.9, 852.425, 855.4875, 857.6625, 857.9375
Hendricks Co Simulcast · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 4 (hex 4) · NAC 6B7 · about 10 mi away
Control 853.4125, 853.8875
Voice 851.15, 851.6125, 852.1375, 852.3875, 852.5375, 853.4, 854.1875, 855.7125, 855.9625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.