Skip to content

Jordan Police Frequencies

We do not have frequencies listed specifically for Jordan in Jasper County, Indiana yet. Countywide channels for Jasper County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Monon (Indiana Project Hoosier SAFE-T), about 9 miles away.

About Jordan Police Frequencies

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry law-enforcement traffic here: Indiana Project Hoosier SAFE-T: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Jordan, start with the Monon site of Indiana Project Hoosier SAFE-T, about 9 miles away. Its control channels: 858.9625, 859.9625 MHz.

Jasper County channels that also cover Jordan

Dispatch

AgencyDescriptionFrequency (MHz)ToneModeFCC
Jasper County Law EnforcementRepeater154.7250
In 158.9700
100.0 PLFMNKSB911

Jails & Corrections

AgencyDescriptionFrequency (MHz)ToneModeFCC
Jasper County Law EnforcementJail Operations453.2625
In 458.2625
CC 1 · TG 3700 · SL 1DMRWQHQ226

Indiana Project Hoosier SAFE-T

AgencyDescriptionTalkgroupHexMode
Jasper County SheriffJasper County Sheriff – Dispatch107902a26D
Jasper County SheriffSheriff Operations107982a2eD

Nearest trunked radio sites

Distances are measured from the center of Jordan.

Monon · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 18 (hex 12) · NAC 6BF · about 9 mi away
Control 858.9625, 859.9625
Voice 851.475, 853.8625, 855.9625, 856.9625, 857.9625, 858.5125
Simulcast · Newton County Government (IN)
RFSS 1 · Site 1 (hex 1) · NAC 420 · about 13 mi away
Control 770.08125, 770.09375, 771.08125, 771.09375
Voice 772.20625, 772.70625
Rensselaer · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 91 (hex 5B) · NAC 6BF · about 14 mi away
Control 854.9875, 859.9375
Voice 851.625, 852.75, 853.65
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.