Skip to content

Spencer Police Frequencies

We do not have frequencies listed specifically for Spencer in Jennings County, Indiana yet. Countywide channels for Jennings County that may also cover this area are shown below when we have them. The closest trunked radio site we have is North Vernon (Indiana Project Hoosier SAFE-T), about 7 miles away.

About Spencer Police Frequencies

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry law-enforcement traffic here: Indiana Project Hoosier SAFE-T: 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Spencer, start with the North Vernon site of Indiana Project Hoosier SAFE-T, about 7 miles away. Its control channels: 852.4375, 853.3375 MHz.

Jennings County channels that also cover Spencer

Dispatch

Dispatch frequencies for Jennings County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jennings County SheriffJennings County Sheriff – Dispatch (Countywide)156.1650
In 159.0150
100.0 PLFMNWZJ667

Jails & Corrections

Jails & Corrections frequencies for Jennings County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jennings County SheriffJail Division155.0100CC 14 · TG * · SL *DMR—

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Jennings County SheriffJennings County Sheriff – Dispatch2142553b1D
Jennings County SheriffInvestigations2142653b2D
Jennings County SheriffOperations2142753b3D
Jennings County SheriffJennings County Sheriff – Tactical Channel2142853b4D
Jennings County SheriffCountywide Law – Car-to-Car2142953b5D

Nearest trunked radio sites

Distances are measured from the center of Spencer.

North Vernon · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 47 (hex 2F) · NAC 6B4 · about 7 mi away
Control 852.4375, 853.3375
Voice 851.3875, 851.6, 851.9
Seymour · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 32 (hex 20) · NAC 6B9 · about 7 mi away
Control 853.9125
Voice 851.4625, 852.4125, 852.8875, 853.3625, 856.7125
Brownstown · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 49 (hex 31) · NAC 6B4 · about 17 mi away
Control 854.3875
Voice 851.225, 852.9375, 853.0375, 853.2875, 854.1125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency do the police use in Spencer?

We do not have a dispatch channel listed specifically for Spencer. County-level dispatch channels in the same county: Jennings County Sheriff 156.1650 MHz (100.0 PL).