About Ragsdale Police Frequencies
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry law-enforcement traffic here: Indiana Project Hoosier SAFE-T: 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Ragsdale, start with the Edwardsport site of Indiana Project Hoosier SAFE-T, about 6 miles away. Its control channels: 857.9625, 860.7625 MHz.
Knox County channels that also cover Ragsdale
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Knox County Sheriff | Vincennes Police | 154.7850 | 146.2 PL | FMN | WQAI266 |
| Knox County Sheriff | Car/Car | 155.2500 In 158.9100 | 123.0 PL | FMN | KSG718 |
Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Knox County Sheriff | Bicknell Police | 153.9950 | FMN | KSC841 | |
| Knox County Sheriff | Vincennes Police | 155.7900 | FMN | WQAI266 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Knox County Sheriff | Knox County Sheriff – Dispatch | 21451 | 53cb | D |
| Knox County Sheriff | Law Enforcement Backup (Site Trunking Mode) | 21452 | 53cc | D |
| Knox County Sheriff | Vincennes University Police | 21468 | 53dc | D |
| Knox County Sheriff | Law Multigroup | 21435 | 53bb | D |
| Knox County Sheriff | Community Corrections | 21458 | 53d2 | D |
Nearest trunked radio sites
Distances are measured from the center of Ragsdale.
Edwardsport · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 20 (hex 14) · NAC 6B1 · about 6 mi away
Control 857.9625, 860.7625
Voice 852.3625, 853.9375, 856.9625
Vincennes · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 67 (hex 43) · NAC 6B6 · about 11 mi away
Control 859.2625, 859.7625
Voice 851.9875, 852.45, 852.65, 853.3625, 857.6625, 858.2625, 858.7625
INDOC Carlisle · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 81 (hex 51) · NAC 6BE · about 12 mi away
Control 857.2375
Voice 856.2375, 858.2375, 859.2375, 859.5375
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Ragsdale?
We do not have a dispatch channel listed specifically for Ragsdale. County-level dispatch channels in the same county: Knox County Sheriff 154.7850 MHz (146.2 PL); Knox County Sheriff 155.2500 MHz (123.0 PL).