Skip to content

Clay Police Frequencies

We do not have frequencies listed specifically for Clay in Owen County, Indiana yet. Countywide channels for Owen County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Spencer (Indiana Project Hoosier SAFE-T), about 7 miles away.

About Clay Police Frequencies

  • 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry law-enforcement traffic here: Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Clay, start with the Spencer site of Indiana Project Hoosier SAFE-T, about 7 miles away. Its control channels: 853.3625, 853.5625 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Owen County channels that also cover Clay

Dispatch

Dispatch frequencies for Owen County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Owen County Law EnforcementOwen County Law Enforcement – Dispatch159.0900
In 153.9050
NXDN48 EncryptedWQDS297

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Owen County SheriffOwen County Sheriff – Dispatch215695441D
Owen County SheriffOperations215705442D
Owen County SheriffOperations215715443D
Owen County SheriffOperations215725444D

Nearest trunked radio sites

Distances are measured from the center of Clay.

Spencer · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 60 (hex 3C) · NAC 6BA · about 7 mi away
Control 853.3625, 853.5625
Voice 851.9875, 852.8625, 854.0625
Solsberry · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 62 (hex 3E) · NAC 6B7 · about 11 mi away
Control 853.675, 854.0875, 855.2375
Voice 851.1625, 851.375, 859.9625
Bloomington · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 18 (hex 12) · NAC 6B1 · about 12 mi away
Control 853.45, 858.4875
Voice 851.25, 851.9625, 852.4, 857.4875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.