Skip to content

Marion Police Frequencies

We do not have frequencies listed specifically for Marion in Pike County, Indiana yet. Countywide channels for Pike County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Augusta (Indiana Project Hoosier SAFE-T), about 5 miles away.

About Marion Police Frequencies

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry law-enforcement traffic here: Indiana Project Hoosier SAFE-T: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Marion, start with the Augusta site of Indiana Project Hoosier SAFE-T, about 5 miles away. Its control channels: 853.9, 859.9875 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Pike County channels that also cover Marion

Dispatch

Dispatch frequencies for Pike County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pike County SheriffPike Co Sheriff – Dispatch155.1900203.5 PLFMNWNKA231

Jails & Corrections

Jails & Corrections frequencies for Pike County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pike County SheriffPike Co Sheriff – Jail Operations159.0900411 DPLFMNKIU359

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Pike County SheriffPike County Sheriff – Dispatch215925458D
Pike County SheriffPike County Sheriff – Tactical Channel215935459D
1 encrypted talkgroup (cannot be monitored)
Indiana Project Hoosier SAFE-T encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Pike County SheriffPike County Sheriff – Tactical Channel21594545aD Encrypted

Nearest trunked radio sites

Distances are measured from the center of Marion.

Augusta · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 68 (hex 44) · NAC 6B6 · about 5 mi away
Control 853.9, 859.9875
Voice 851.2625, 852.8625, 853.325
Jasper · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 23 (hex 17) · NAC 6BD · about 10 mi away
Control 853.7125, 857.2125
Voice 851.125, 852.8875, 853.35, 859.2125
Petersburg · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 22 (hex 16) · NAC 6B2 · about 12 mi away
Control 852.975, 853.475
Voice 851.475, 851.9375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency do the police use in Marion?

We do not have a dispatch channel listed specifically for Marion. County-level dispatch channels in the same county: Pike County Sheriff 155.1900 MHz (203.5 PL).