Skip to content

Washington Police Frequencies

We do not have frequencies listed specifically for Washington in Ripley County, Indiana yet. Countywide channels for Ripley County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Versailles (Indiana Project Hoosier SAFE-T), about 6 miles away.

About Washington Police Frequencies

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry law-enforcement traffic here: Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Washington, start with the Versailles site of Indiana Project Hoosier SAFE-T, about 6 miles away. Its control channels: 851.95, 852.475, 852.7125 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Ripley County channels that also cover Washington

Dispatch

Dispatch frequencies for Ripley County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ripley County SheriffDispatch Car To Base154.8900CSQFMNKSC597
Ripley County SheriffDispatch Base To Car155.415079.7 PLFMNKSC597

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Ripley County SheriffCounty Law Enforcement Dispatch21615546fD
Ripley County SheriffCounty Law Enforcement Tactical216185472D
Ripley County SheriffCounty Jail Operations216165470D
1 encrypted talkgroup (cannot be monitored)
Indiana Project Hoosier SAFE-T encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Ripley County SheriffRipley County Sheriff – Tactical Channel216175471D Encrypted

Nearest trunked radio sites

Distances are measured from the center of Washington.

Versailles · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 29 (hex 1D) · NAC 6B2 · about 6 mi away
Control 851.95, 852.475, 852.7125, 853.3875
Voice 851.425
Lawrenceburg · Northern Kentucky Regional Communications System (NKYRCS)
RFSS 1 · Site 4 (hex 4) · about 10 mi away
Voice 855.2625, 855.6125, 856.0625, 857.0375, 857.3625, 858.0125
Aurora · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 43 (hex 2B) · NAC 6B4 · about 10 mi away
Control 852.4, 857.2125, 858.2125, 859.2125
Voice 851.4
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency do the police use in Washington?

We do not have a dispatch channel listed specifically for Washington. County-level dispatch channels in the same county: Ripley County Sheriff 154.8900 MHz (CSQ); Ripley County Sheriff 155.4150 MHz (79.7 PL).