About Luce Police Frequencies
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry law-enforcement traffic here: Indiana Project Hoosier SAFE-T: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Luce, start with the Patronville site of Indiana Project Hoosier SAFE-T, about 5 miles away. Its control channels: 853.4125, 853.8875 MHz.
Spencer County channels that also cover Luce
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Spencer County Sheriff | Spencer County Sheriff – Dispatch | 155.5650 In 159.0300 | 107.2 PL | FMN | KSG772 |
Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Spencer County Sheriff | Spencer County Sheriff – Tactical Channel | 155.8500 | FMN | KSG772 |
Jails & Corrections
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Spencer County Sheriff | Jail | 155.6100 | FMN | KSG772 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Spencer County Sheriff | Spencer County Sheriff – Dispatch (Countywide) | 21645 | 548d | D |
| Spencer County Sheriff | Car-to-Car (Countywide) | 21644 | 548c | D |
Nearest trunked radio sites
Distances are measured from the center of Luce.
Patronville · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 74 (hex 4A) · NAC 6BB · about 5 mi away
Control 853.4125, 853.8875
Voice 851.4625, 852.475
Yankeetown · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 73 (hex 49) · NAC 6BC · about 7 mi away
Control 852.9875, 853.8
Voice 851.15, 851.4375, 851.9625, 854.0125
Boonville · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 72 (hex 48) · NAC 6B7 · about 10 mi away
Control 853.9625, 854.0875
Voice 851.6625, 852.3875, 853.3
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Luce?
We do not have a dispatch channel listed specifically for Luce. County-level dispatch channels in the same county: Spencer County Sheriff 155.5650 MHz (107.2 PL).