Skip to content

Washington Police Frequencies

We do not have frequencies listed specifically for Washington in Starke County, Indiana yet. Countywide channels for Starke County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Bass Lake (Indiana Project Hoosier SAFE-T), about 8 miles away.

About Washington Police Frequencies

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry law-enforcement traffic here: Indiana Project Hoosier SAFE-T: 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Washington, start with the Bass Lake site of Indiana Project Hoosier SAFE-T, about 8 miles away. Its control channels: 853.3375, 853.7375 MHz.

Starke County channels that also cover Washington

Tactical

Tactical frequencies for Starke County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Starke County SheriffMounted Sheriff's Posse155.5000FMN—

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Starke County SheriffStarke County Sheriff – Dispatch12300300cD
Starke County SheriffStarke County Sheriff – Dispatch12301300dD
Starke County SheriffOperations12302300eD
Starke County SheriffOperations12303300fD
Starke County SheriffOperations123043010D

Nearest trunked radio sites

Distances are measured from the center of Washington.

Bass Lake · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 61 (hex 3D) · NAC 6B1 · about 8 mi away
Control 853.3375, 853.7375
Voice 851.3625, 852.3625, 853.0875
Plymouth · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 40 (hex 28) · NAC 6B1 · about 11 mi away
Control 857.7125, 858.4625
Voice 851.45, 851.95, 852.2125, 852.45, 852.95, 853.95, 857.2125
La Porte Co Simulcast · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 7 (hex 7) · NAC 6B6 · about 18 mi away
Control 857.4625, 858.7125
Voice 769.60625, 770.05625, 770.35625, 770.83125, 851.375, 853.8125, 854.3125, 856.4625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.