About Pleasant Police Frequencies
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry law-enforcement traffic here: Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Pleasant, start with the Steuben Co Simulcast site of Indiana Project Hoosier SAFE-T, about 2 miles away. Its control channels: 852.975, 853.45 MHz.
- 1 listed entry is marked encrypted. No scanner can decode encrypted audio.
Steuben County channels that also cover Pleasant
Talk-around & Car-to-Car
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Steuben County Sheriff | Back-Up to 800 MHz | 155.7000 In 154.8300 | 77.0 PL | FMN | KSA433 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Steuben County Sheriff | County Law – Dispatch | 12677 | 3185 | D |
| Steuben County Sheriff | Jail – Operations | 12656 | 3170 | D |
| Steuben County Sheriff | Jail – Operations | 12676 | 3184 | D |
1 encrypted talkgroup (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Steuben County Sheriff | County Law – IDACS – Information | 12675 | 3183 | D Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Pleasant.
Steuben Co Simulcast · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 6 (hex 6) · NAC 6B6 · about 2 mi away
Control 852.975, 853.45
Voice 851.1625, 851.375, 851.9375, 853.1125, 853.9125, 856.2125, 857.2125, 858.2125, 859.2125
Angola · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 44 (hex 2C) · NAC 6B5 · about 2 mi away
Control 853.45, 853.9125
Voice 851.375, 851.9375, 852.975
Lagrange · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 42 (hex 2A) · NAC 6BB · about 20 mi away
Control 853.225, 853.425
Voice 851.2375, 851.7125, 851.8625, 852.8625
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.