About Windfall City Police Frequencies
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry law-enforcement traffic here: Indiana Project Hoosier SAFE-T: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Windfall City, start with the Tipton site of Indiana Project Hoosier SAFE-T, about 7 miles away. Its control channels: 852.6625, 852.9375 MHz.
- 1 listed entry is marked encrypted. No scanner can decode encrypted audio.
Tipton County channels that also cover Windfall City
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Tipton County Law Enforcement | Tipton County Law Enforcement – Dispatch | 155.6400 In 156.0900 | 156.7 PL | FMN | WNQT217 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Tipton County Sheriff | Tipton County Sheriff – Dispatch (County) | 12339 | 3033 | D |
| Tipton County Sheriff | Jail – Operations (County) | 12343 | 3037 | D |
1 encrypted talkgroup (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Tipton County Sheriff | Tipton County Sheriff – Tactical Channel (County) | 12349 | 303d | D Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Windfall City.
Tipton · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 56 (hex 38) · NAC 6B6 · about 7 mi away
Control 852.6625, 852.9375
Voice 851.075, 851.4125, 851.6375, 852.475
Kokomo · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 55 (hex 37) · NAC 6B7 · about 13 mi away
Control 853.8875, 853.9125
Voice 851.8625, 853.3875, 853.4125, 854.3375
Simulcast · Howard County IN Public Safety
RFSS 1 · Site 1 (hex 1) · NAC 734 · about 13 mi away
Control 851.2, 851.3375, 852.125, 852.325, 852.6, 852.85, 853.2125, 853.2875, 854.0625, 854.4875
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.