About Harmony Police Frequencies
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry law-enforcement traffic here: Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Harmony, start with the Brookville site of Indiana Project Hoosier SAFE-T, about 6 miles away. Its control channels: 853.8875 MHz.
Union County channels that also cover Harmony
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Union County Sheriff | County Dispatch | 154.7475 In 158.9775 | 712 DPL | FMN | KSD794 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Union County Sheriff | Union County Sheriff – Dispatch | 12358 | 3046 | D |
| Union County Sheriff | Operations | 12359 | 3047 | D |
| Union County Sheriff | Operations | 12360 | 3048 | D |
| Union County Sheriff | Operations | 12361 | 3049 | D |
Nearest trunked radio sites
Distances are measured from the center of Harmony.
Brookville · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 41 (hex 29) · NAC 6B4 · about 6 mi away
Control 853.8875
Voice 851.475, 851.975, 853.475, 853.7
Connersville · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 38 (hex 26) · NAC 6B8 · about 11 mi away
Control 851.8875, 852.3875, 853.725
Voice 851.2, 851.45
Peppertown · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 28 (hex 1C) · NAC 6B2 · about 15 mi away
Control 857.7125, 858.7125
Voice 851.8625, 852.3625, 852.875
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Harmony?
We do not have a dispatch channel listed specifically for Harmony. County-level dispatch channels in the same county: Union County Sheriff 154.7475 MHz (712 DPL).