Skip to content

Hart Police Frequencies

We do not have frequencies listed specifically for Hart in Warrick County, Indiana yet. Countywide channels for Warrick County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Scalesville (Indiana Project Hoosier SAFE-T), about 6 miles away.

About Hart Police Frequencies

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry law-enforcement traffic here: Indiana Project Hoosier SAFE-T: 10 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Hart, start with the Scalesville site of Indiana Project Hoosier SAFE-T, about 6 miles away. Its control channels: 852.4, 852.95, 853.4375 MHz.

Warrick County channels that also cover Hart

Talk-around & Car-to-Car

Talk-around & Car-to-Car frequencies for Warrick County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Warrick County SheriffTalkaround453.287591.5 PLFMNWPUW590

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Warrick County SheriffInformation2168554b5D
Warrick County SheriffWarrick County Sheriff – Dispatch2168754b7D
Warrick County SheriffLaw Investigations2167054a6D
Warrick County SheriffWarrick County Sheriff – Tactical Channel2168154b1D
Warrick County SheriffWarrick County Sheriff – Tactical Channel2168254b2D
Warrick County SheriffWarrick County Sheriff – Tactical Channel2168354b3D
Warrick County SheriffCar-to-Car2168454b4D
Warrick County SheriffCar-to-Car2168654b6D
Warrick County SheriffData2168854b8D
Warrick County SheriffJail / Court Security2168054b0D

Nearest trunked radio sites

Distances are measured from the center of Hart.

Scalesville · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 26 (hex 1A) · NAC 6B2 · about 6 mi away
Control 852.4, 852.95, 853.4375
Voice 851.4
Evansville · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 25 (hex 19) · NAC 6B2 · about 6 mi away
Control 853.9125, 854.0625
Voice 851.6125, 852.4375, 853.5125
Boonville · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 72 (hex 48) · NAC 6B7 · about 10 mi away
Control 853.9625, 854.0875
Voice 851.6625, 852.3875, 853.3
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.