Skip to content

Washington County Police Frequencies

Washington County in Indiana has 3 countywide conventional frequencies and 4 countywide talkgroups in our database. Use the list of 57 cities and communities below for local police departments.

About Washington County Police Frequencies

Quick answer: Dispatch for Washington County: Washington County Sheriff 151.4450 MHz, NXDN48, no tone.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 2 conventional channels use a digital mode (NXDN48), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry law-enforcement traffic here: Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Washington County, start with the Fleenortown site of Indiana Project Hoosier SAFE-T. Its control channels: 853.4625, 855.7125 MHz.
  • 4 listed entries are marked encrypted. No scanner can decode encrypted audio.

Data updated .

Washington County conventional frequencies

Dispatch

Dispatch frequencies for Washington County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Washington County SheriffWashington County Sheriff – Dispatch151.4450NXDN48WQF450

Tactical

Tactical frequencies for Washington County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Washington County SheriffWashington County Sheriff – Tactical Channel151.4075203.5 PLFMNWQF450

Talk-around & Car-to-Car

Talk-around & Car-to-Car frequencies for Washington County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Washington County SheriffCar-to-Car159.3750NXDN48WQF450

Washington County trunked talkgroups

Indiana Project Hoosier SAFE-T

4 encrypted talkgroups (cannot be monitored)
Indiana Project Hoosier SAFE-T encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Washington County SheriffWashington County Sheriff – Dispatch2169754c1D Encrypted
Washington County SheriffOperations2169854c2D Encrypted
Washington County SheriffWashington County Sheriff – Tactical Channel2169954c3D Encrypted
Washington County SheriffLaw Data (County)2170354c7D Encrypted

Radio system sites in Washington County

Program the control channel first; your scanner finds the voice channels from it.

Fleenortown · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 50 (hex 32) · NAC 6B8
Control 853.4625, 855.7125
Voice 851.3125, 851.725, 852.95
Salem · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 51 (hex 33) · NAC 6B5
Control 853.975
Voice 852.7875, 853.2125, 853.8125
Pekin · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 52 (hex 34) · NAC 6B5
Control 853.85
Voice 852.7875, 853.2125, 853.8125, 853.975
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Washington County

Common questions

What frequency do the police use in Washington County?

Dispatch channels listed for Washington County: Washington County Sheriff 151.4450 MHz, NXDN48, no tone.

What is the sheriff's dispatch frequency in Washington County?

Washington County Sheriff 151.4450 MHz, NXDN48, no tone.

Do the police use a trunked radio system in Washington County?

Yes. Law-enforcement talkgroups are listed for Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to police in Washington County?

The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Washington County?

For Washington County, start with the Fleenortown site of Indiana Project Hoosier SAFE-T. Its control channels are 853.4625, 855.7125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Washington County police frequencies encrypted?

None of the 3 conventional frequencies listed for Washington County are marked encrypted.

Are Washington County police talkgroups encrypted?

4 of the 4 talkgroups listed for Washington County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.