Skip to content

Rockcreek Police Frequencies

We do not have frequencies listed specifically for Rockcreek in Wells County, Indiana yet. Countywide channels for Wells County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Bluffton (Indiana Project Hoosier SAFE-T), about 5 miles away.

About Rockcreek Police Frequencies

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (NXDN96), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry law-enforcement traffic here: Indiana Project Hoosier SAFE-T: 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Rockcreek, start with the Bluffton site of Indiana Project Hoosier SAFE-T, about 5 miles away. Its control channels: 858.9625, 859.9625 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.
  • 2 entries are marked expired, so they may no longer be in use.

Wells County channels that also cover Rockcreek

Tactical

AgencyDescriptionFrequency (MHz)ToneModeFCC
Wells County Sheriff ExpiredWells County Sheriff – Tactical Channel460.0500RAN 1NXDN96 WPWD535
Wells County Sheriff ExpiredWells County Sheriff – Tactical Channel465.0500FMNWPWD535

Jails & Corrections

AgencyDescriptionFrequency (MHz)ToneModeFCC
Wells County SheriffJail155.7900
In 159.0300
97.4 PLFMNWNGW979

Indiana Project Hoosier SAFE-T

AgencyDescriptionTalkgroupHexMode
Wells County SheriffWells County Sheriff – Dispatch1245530a7D
Wells County SheriffWells County Sheriff – Tactical Channel1245630a8D
Wells County SheriffWells County Sheriff – Tactical Channel1245730a9D
Wells County SheriffWells County Sheriff – Tactical Channel1245830aaD
Wells County SheriffDetectives1245430a6D

Nearest trunked radio sites

Distances are measured from the center of Rockcreek.

Bluffton · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 51 (hex 33) · NAC 6BA · about 5 mi away
Control 858.9625, 859.9625
Voice 851.25, 851.775, 852.8875, 853.9125, 857.9625
Warren · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 22 (hex 16) · NAC 6B2 · about 8 mi away
Control 856.9875, 857.9875
Voice 852.8125, 853.0875, 853.5125
Huntington · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 50 (hex 32) · NAC 6B0 · about 13 mi away
Control 858.9875, 859.7125
Voice 851.4125, 852.9125, 853.475, 857.7125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.