About Grandview Police Frequencies
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry law-enforcement traffic here: Kansas Statewide Interoperable Communication System (KSICS): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Grandview, start with the Dodge City site of Kansas Statewide Interoperable Communication System (KSICS), about 9 miles away. Its control channels: 856.2375 MHz.
- 3 listed entries are marked encrypted. No scanner can decode encrypted audio.
Ford County channels that also cover Grandview
Jails & Corrections
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Ford County Jail | County Jail | 154.9350 | 192.8 PL | FM | — |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Ford County Sheriff | Ford County Sheriff – Dispatch | 2694 | a86 | D |
3 encrypted talkgroups (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Ford County Sheriff | Ford County Sheriff – Tactical Channel | 2695 | a87 | D Encrypted |
| Ford County Sheriff | Ford County Sheriff – Tactical Channel | 2696 | a88 | D Encrypted |
| Ford County Sheriff | Encrypted | 2748 | abc | D Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Grandview.
Dodge City · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 45 (hex 2D) · about 9 mi away
Control 856.2375
Voice 854.9625, 855.2125, 855.4875, 855.7375, 855.9875
Spearville · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 47 (hex 2F) · about 10 mi away
Control 858.4875
Voice 855.7125, 857.9375, 858.2375
Ford · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 23 (hex 17) · about 13 mi away
Control 852.4625, 852.725
Voice 851.8375, 852.975, 853.4, 853.8625
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.