Skip to content

Indiana Police Frequencies

We do not have frequencies listed specifically for Indiana in Graham County, Kansas yet. Countywide channels for Graham County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Morland (Kansas Statewide Interoperable Communication System (KSICS)), about 13 miles away.

About Indiana Police Frequencies

  • Trunked radio systems that carry law-enforcement traffic here: Kansas Statewide Interoperable Communication System (KSICS): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Indiana, start with the Morland site of Kansas Statewide Interoperable Communication System (KSICS), about 13 miles away. Its control channels: 851.7375, 852.0625 MHz.

Graham County channels that also cover Indiana

Kansas Statewide Interoperable Communication System (KSICS)

AgencyDescriptionTalkgroupHexMode
Graham County SheriffLaw Enforcement Dispatch133953bD
Graham County SheriffLaw Enforcement Tactical134053cD
Graham County SheriffLaw Enforcement Tactical134153dD

Nearest trunked radio sites

Distances are measured from the center of Indiana.

Morland · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 32 (hex 20) · NAC 1B7 · about 13 mi away
Control 851.7375, 852.0625
Voice 851.425, 852.3875, 853.375, 853.675
Norton · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 33 (hex 21) · about 19 mi away
Control 852.4875, 852.775
Voice 851.7125, 853.075, 853.425, 853.725
Zurich · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 29 (hex 1D) · NAC 1BB · about 32 mi away
Control 852.1125, 852.4125
Voice 851.8, 852.75, 853.475, 853.9
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.