Skip to content

Elkader Police Frequencies

We do not have frequencies listed specifically for Elkader in Logan County, Kansas yet. Countywide channels for Logan County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Oakley (Kansas Statewide Interoperable Communication System (KSICS)), about 5 miles away.

About Elkader Police Frequencies

  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry law-enforcement traffic here: Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Elkader, start with the Oakley site of Kansas Statewide Interoperable Communication System (KSICS), about 5 miles away. Its control channels: 852.4875, 852.775 MHz.

Logan County channels that also cover Elkader

Tactical

Tactical frequencies for Logan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Logan County SheriffLogan County Sheriff – Tactical Channel155.7300P25KAJ895

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Logan County SheriffLogan County Sheriff – Dispatch44051135D

Nearest trunked radio sites

Distances are measured from the center of Elkader.

Oakley · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 42 (hex 2A) · NAC 1B6 · about 5 mi away
Control 852.4875, 852.775
Voice 851.7125, 853.075, 853.425, 853.725
Quinter · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 31 (hex 1F) · NAC 1B5 · about 34 mi away
Control 851.55, 852.3375
Voice 851.275, 852.175, 853.175, 853.35, 853.6125
Halford · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 36 (hex 24) · NAC 1B5 · about 34 mi away
Control 852.2375, 852.9
Voice 851.9, 853.25, 853.5, 853.925
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.