Skip to content

West Plains Police Frequencies

We do not have frequencies listed specifically for West Plains in Meade County, Kansas yet. Countywide channels for Meade County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Collano (Kansas Statewide Interoperable Communication System (KSICS)), about 4 miles away.

About West Plains Police Frequencies

  • Trunked radio systems that carry law-enforcement traffic here: Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup; Meade County Public Safety: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For West Plains, start with the Collano site of Kansas Statewide Interoperable Communication System (KSICS), about 4 miles away. Its control channels: 851.55, 852.3375 MHz.

Meade County channels that also cover West Plains

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Meade County SheriffMeade County Sheriff – Dispatch2945b81D

Meade County Public Safety

Meade County Public Safety talkgroups
AgencyDescriptionTalkgroupHexMode
Meade County SheriffMeade County Sheriff – Dispatch10064D
Meade County SheriffCounty Tactical1408cD
Meade County SheriffCounty Tactical15096D
Meade County SheriffCounty Tactical160a0D

Nearest trunked radio sites

Distances are measured from the center of West Plains.

Collano · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 28 (hex 1C) · NAC 1B0 · about 4 mi away
Control 851.55, 852.3375
Voice 851.275, 853.175, 853.35, 853.6125
Meade · Meade County Public Safety
Site 1 (hex 1) · about 9 mi away
Voice 453.1625, 453.5125, 453.8375
Liberal · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 57 (hex 39) · about 22 mi away
Control 856.2125
Voice 854.9875, 857.2125, 857.7625, 858.2125, 858.7625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.