About Bloomfield Police Frequencies
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry law-enforcement traffic here: Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Bloomfield, start with the Beloit site of Kansas Statewide Interoperable Communication System (KSICS), about 2 miles away. Its control channels: 852.3125, 852.6125 MHz.
Mitchell County channels that also cover Bloomfield
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Mitchell County Sheriff | Mitchell County Sheriff – Dispatch (Dispatch before KSICS) | 155.0100 In 159.0300 | 162.2 PL | FMN | KAF370 |
Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Mitchell County Sheriff | Mitchell County Sheriff – Tactical Channel | 155.7150 | FMN | WRD878 |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Mitchell County Sheriff | County Law Enforcement | 4687 | 124f | D |
Nearest trunked radio sites
Distances are measured from the center of Bloomfield.
Beloit · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 23 (hex 17) · NAC 1B1 · about 2 mi away
Control 852.3125, 852.6125
Voice 851.325, 852.9375, 853.1875, 853.65
KSU Campus · Riley County
RFSS 37 · Site 37 (hex 25) · NAC 025 · about 23 mi away
Control 856.0125, 856.9375, 857.7625, 858.2625, 858.7625, 859.2625, 859.9375
Concordia · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 17 (hex 11) · NAC 1B1 · about 24 mi away
Control 852.2375, 852.9
Voice 851.9, 853.25, 853.5, 853.925
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Bloomfield?
We do not have a dispatch channel listed specifically for Bloomfield. County-level dispatch channels in the same county: Mitchell County Sheriff 155.0100 MHz (162.2 PL).