About Fawn Creek Police Frequencies
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry law-enforcement traffic here: Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Fawn Creek, start with the Independence site of Kansas Statewide Interoperable Communication System (KSICS), about 13 miles away. Its control channels: 852.3125, 852.6125 MHz.
- 1 listed entry is marked encrypted. No scanner can decode encrypted audio.
Montgomery County channels that also cover Fawn Creek
Jails & Corrections
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Montgomery County Jail | County Jail | 453.5250 In 458.5250 | FMN | WNRF591 |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Montgomery County Sheriff | Montgomery County Sheriff – Dispatch | 61517 | f04d | D |
1 encrypted talkgroup (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Montgomery County Sheriff | Montgomery County Sheriff – Tactical Channel | 61518 | f04e | D Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Fawn Creek.
Independence · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 4 (hex 4) · NAC 1B5 · about 13 mi away
Control 852.3125, 852.6125
Voice 851.6, 852.9375, 853.1875, 853.65
Altamont · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 41 (hex 29) · NAC 1B1 · about 25 mi away
Control 851.9375, 852.15
Voice 851.7875, 852.425, 852.825, 853.55
Sedan · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 8 (hex 8) · NAC 1B9 · about 31 mi away
Control 851.7125, 852.4875
Voice 852.775, 853.075, 853.425, 853.725
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.