About La Crosse-Brookdale Police Frequencies
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry law-enforcement traffic here: Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For La Crosse-Brookdale, start with the Rush Center site of Kansas Statewide Interoperable Communication System (KSICS), about 7 miles away. Its control channels: 851.7375, 852.0625 MHz.
Rush County channels that also cover La Crosse-Brookdale
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Rush County Sheriff | Rush County Sheriff – Dispatch (Dispatch before KSICS) | 155.5500 In 159.0300 | FMN | WNMJ820 | |
| Rush County Sheriff | Rush County Sheriff – Dispatch (Tactical before KSICS) | 155.6850 In 154.7700 | FMN | WNMJ820 |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Rush County Sheriff | Rush County Sheriff – Dispatch | 583 | 247 | D |
| Rush County Sheriff | Rush County Sheriff – Tactical Channel | 584 | 248 | D |
Nearest trunked radio sites
Distances are measured from the center of La Crosse-Brookdale.
Rush Center · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 22 (hex 16) · NAC 1B9 · about 7 mi away
Control 851.7375, 852.0625
Voice 851.425, 852.3875, 853.375, 853.675
Ness City · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 25 (hex 19) · NAC 1B7 · about 25 mi away
Control 852.2375, 852.9
Voice 851.9, 853.25, 853.5, 853.925
Site 1 · Ellis County
RFSS 1 · Site 1 (hex 1) · NAC 971 · about 26 mi away
Control 856.7625, 857.2125, 857.7625
Voice 856.2125, 858.2125, 858.7625, 859.2125, 859.7625
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in La Crosse-Brookdale?
We do not have a dispatch channel listed specifically for La Crosse-Brookdale. County-level dispatch channels in the same county: Rush County Sheriff 155.5500 MHz; Rush County Sheriff 155.6850 MHz.