Skip to content

Franklin Police Frequencies

We do not have frequencies listed specifically for Franklin in Trego County, Kansas yet. Countywide channels for Trego County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Quinter (Kansas Statewide Interoperable Communication System (KSICS)), about 12 miles away.

About Franklin Police Frequencies

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry law-enforcement traffic here: Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Franklin, start with the Quinter site of Kansas Statewide Interoperable Communication System (KSICS), about 12 miles away. Its control channels: 851.55, 852.3375 MHz.

Trego County channels that also cover Franklin

Dispatch

Dispatch frequencies for Trego County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Trego County SheriffTrego County Sheriff – Dispatch – Link to KSICS851.2875
In 806.2875
FMWQPW770

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Trego County SheriffTrego County Sheriff – Tactical Channel43521100D

Nearest trunked radio sites

Distances are measured from the center of Franklin.

Quinter · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 31 (hex 1F) · NAC 1B5 · about 12 mi away
Control 851.55, 852.3375
Voice 851.275, 852.175, 853.175, 853.35, 853.6125
Ness City · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 25 (hex 19) · NAC 1B7 · about 26 mi away
Control 852.2375, 852.9
Voice 851.9, 853.25, 853.5, 853.925
Ellis · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 30 (hex 1E) · NAC 1BC · about 29 mi away
Control 852.3125, 852.6125
Voice 851.6, 852.9375, 853.1875, 853.65
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency do the police use in Franklin?

We do not have a dispatch channel listed specifically for Franklin. County-level dispatch channels in the same county: Trego County Sheriff 851.2875 MHz.