About Independence Police Frequencies
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry law-enforcement traffic here: Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Independence, start with the Blue Rapids site of Kansas Statewide Interoperable Communication System (KSICS), about 18 miles away. Its control channels: 852.1125, 852.4125 MHz.
Washington County channels that also cover Independence
Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Washington County Sheriff | Car-to-Car | 153.8300 | 151.4 PL | FMN | WPLS377 |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Washington County Sheriff | Washington County Sheriff – Dispatch | 4806 | 12c6 | D |
Nearest trunked radio sites
Distances are measured from the center of Independence.
Blue Rapids · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 11 (hex B) · about 18 mi away
Control 852.1125, 852.4125
Voice 851.8, 852.75, 853.475, 853.9
Haddam · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 19 (hex 13) · NAC 1B4 · about 25 mi away
Control 852.4625, 852.725
Voice 851.8375, 852.975, 853.4, 853.8625
Randolph · Riley County
RFSS 33 · Site 33 (hex 21) · NAC 021 · about 35 mi away
Control 851.1375, 851.475, 852.5875, 853.3
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.