About Rosine Police Frequencies
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 3 conventional channels use a digital mode (NXDN96), which needs a scanner that decodes that mode.
- Trunked radio systems that carry law-enforcement traffic here: Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Rosine, start with the Hartford site of KY SERVS, about 10 miles away. Its control channels: 771.30625, 771.86875, 772.48125 MHz.
- 1 listed entry is marked encrypted. No scanner can decode encrypted audio.
Ohio County channels that also cover Rosine
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Ohio County Sheriff | Ohio County Sheriff – Dispatch | 151.3700 In 159.1950 | 118.8 PL | FMN | WQNX813 |
Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Ohio County Sheriff | Ohio County Sheriff – Tactical Channel | 152.3750 In 157.6350 | FMN | WPAJ635 |
Talk-around & Car-to-Car
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Ohio County Sheriff | Car-to-Car | 154.6500 | NXDN96 | WQQH255 | |
| Ohio County Sheriff | Operations | 154.8750 In 158.9400 | RAN 40 | NXDN96 Encrypted | WQQH255 |
| Ohio County Sheriff | Information | 155.2500 | NXDN96 | KNIQ755 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Ohio County Sheriff | Ohio County Sheriff – Dispatch | 21540 | 5424 | D |
| Ohio County Sheriff | Operations | 21541 | 5425 | D |
| Ohio County Sheriff | Operations | 21542 | 5426 | D |
| Ohio County Sheriff | Operations | 21543 | 5427 | D |
Nearest trunked radio sites
Distances are measured from the center of Rosine.
Hartford · KY SERVS
RFSS 3 · Site 67 (hex 43) · NAC 9C7 · about 10 mi away
Control 771.30625, 771.86875, 772.48125, 772.79375
Voice 769.30625, 770.54375
Whitesville · KY SERVS
RFSS 3 · Site 66 (hex 42) · NAC 9C6 · about 17 mi away
Control 772.05625, 772.65625, 773.43125, 773.94375
Voice 770.76875, 771.35625
Morgantown · KY SERVS
RFSS 3 · Site 122 (hex 7A) · NAC 9C3 · about 20 mi away
Control 774.43125
Voice 771.43125, 771.81875, 774.19375
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Rosine?
We do not have a dispatch channel listed specifically for Rosine. County-level dispatch channels in the same county: Ohio County Sheriff 151.3700 MHz (118.8 PL).