Skip to content

Elk Creek Police Frequencies

We do not have frequencies listed specifically for Elk Creek in Spencer County, Kentucky yet. Countywide channels for Spencer County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Jeptha Knob (Louisville Emergency Communications Network: MetroSafe), about 10 miles away.

About Elk Creek Police Frequencies

  • Trunked radio systems that carry law-enforcement traffic here: Indiana Project Hoosier SAFE-T: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Elk Creek, start with the Jeptha Knob site of Louisville Emergency Communications Network: MetroSafe, about 10 miles away. Its control channels: 853.225, 853.875 MHz.

Spencer County channels that also cover Elk Creek

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Spencer County SheriffSpencer County Sheriff – Dispatch (Countywide)21645548dD
Spencer County SheriffCar-to-Car (Countywide)21644548cD

Nearest trunked radio sites

Distances are measured from the center of Elk Creek.

Jeptha Knob · Louisville Emergency Communications Network: MetroSafe
RFSS 1 · Site 3 (hex 3) · NAC 1A0 · about 10 mi away
Control 853.225, 853.875
Voice 851.475, 852.475, 852.95
New Bernheim · Louisville Emergency Communications Network: MetroSafe
RFSS 1 · Site 5 (hex 5) · NAC 1A5 · about 16 mi away
Control 852.3875, 853.125
Voice 851.6375, 851.8875, 852.1375, 854.3875
New Bernheim · KY SERVS
RFSS 3 · Site 32 (hex 20) · NAC 9C2 · about 18 mi away
Control 774.68125
Voice 771.64375, 771.94375, 773.63125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.