Skip to content

Wilber Police Frequencies

We do not have frequencies listed specifically for Wilber in Iosco County, Michigan yet. Countywide channels for Iosco County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Oscoda (Michigan's Public Safety Communications System (MPSCS)), about 7 miles away.

About Wilber Police Frequencies

  • Trunked radio systems that carry law-enforcement traffic here: Michigan's Public Safety Communications System (MPSCS): 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Wilber, start with the Oscoda site of Michigan's Public Safety Communications System (MPSCS), about 7 miles away. Its control channels: 853.3625, 853.8625 MHz.

Iosco County channels that also cover Wilber

Michigan's Public Safety Communications System (MPSCS)

AgencyDescriptionTalkgroupHexMode
Iosco County Law EnforcementIosco County Law Enforcement – Dispatch12554e7D
Iosco County Law EnforcementCountywide Narcotics1170492D
Iosco County Law EnforcementIosco County Law Enforcement – Alternate14935d5D
Iosco County Law EnforcementCountywide Police Tactical14955d7D
Iosco County Law EnforcementCountywide Police Tactical14965d8D
Iosco County Law EnforcementSheriff Administration12184c2D

Nearest trunked radio sites

Distances are measured from the center of Wilber.

Oscoda · Michigan's Public Safety Communications System (MPSCS)
RFSS 1 · Site 12 (hex C) · NAC 794 · about 7 mi away
Control 853.3625, 853.8625
Voice 769.18125, 851.0625, 851.8625, 852.8625, 854.7875, 854.9625, 855.9875, 861.3375, 861.7625
National City · Michigan's Public Safety Communications System (MPSCS)
RFSS 1 · Site 13 (hex D) · NAC 795 · about 16 mi away
Control 853.475, 853.975
Voice 851.125, 851.975, 852.975, 856.2875, 856.3125, 858.3125, 859.3125, 860.3125
South Branch · Michigan's Public Safety Communications System (MPSCS)
RFSS 1 · Site 18 (hex 12) · NAC 796 · about 21 mi away
Control 853.425, 853.925
Voice 851.425, 852.925, 854.1375, 854.2125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.