Skip to content

Hancocks Bridge Police Frequencies

We do not have frequencies listed specifically for Hancocks Bridge in Salem County, New Jersey yet. Countywide channels for Salem County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Simulcast (Salem County Public Safety), about 7 miles away.

About Hancocks Bridge Police Frequencies

  • Trunked radio systems that carry law-enforcement traffic here: Salem County Public Safety: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Hancocks Bridge, start with the Simulcast site of Salem County Public Safety, about 7 miles away. Its control channels: 769.58125, 771.71875, 772.80625 MHz.
  • 4 listed entries are marked encrypted. No scanner can decode encrypted audio.

Salem County channels that also cover Hancocks Bridge

Salem County Public Safety

4 encrypted talkgroups (cannot be monitored)
AgencyDescriptionTalkgroupHexMode
Salem County SheriffWest Zone10183faT
Salem County SheriffEast Zone10193fbT
Salem County SheriffSalem City Police – Primary103840eT
Salem County SheriffSalem County Sheriff – Alternate10203fcT

Nearest trunked radio sites

Distances are measured from the center of Hancocks Bridge.

Simulcast · Salem County Public Safety
RFSS 1 · Site 1 (hex 1) · NAC C51 · about 7 mi away
Control 769.58125, 771.71875, 772.80625, 774.40625
Voice 769.10625, 771.59375, 771.85625, 773.43125
Pilesgrove · New Jersey Transit
Site 28 (hex 1C) · about 12 mi away
Control 854.3375
Voice 858.0125
Bridgeton · New Jersey Transit
Site 32 (hex 20) · about 14 mi away
Voice 857.6875, 859.3875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.