About Albany Police Frequencies
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
Bradford County channels that also cover Albany
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Countywide Police | Countywide Police | 155.4150 | 100.0 PL | FMN | WPEZ832 |
Nearest trunked radio sites
Distances are measured from the center of Albany.
Robwood Mtn (BRAD41) · PA-STARNet: Pennsylvania Statewide Radio Network
RFSS 1 · Site 114 (hex 72) · NAC 947 · about 3 mi away
Control 151.4975, 154.935
Voice 152.775
Mehoopany (WYOM30) · PA-STARNet: Pennsylvania Statewide Radio Network
RFSS 1 · Site 115 (hex 73) · NAC 946 · about 19 mi away
Control 152.115, 153.4325
North Mtn (SULL01) · PA-STARNet: Pennsylvania Statewide Radio Network
RFSS 1 · Site 102 (hex 66) · NAC 94D · about 21 mi away
Control 151.4525, 152.695
Voice 152.745
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Albany?
We do not have a dispatch channel listed specifically for Albany. County-level dispatch channels in the same county: Countywide Police 155.4150 MHz (100.0 PL).