About Granville Police Frequencies
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
Bradford County channels that also cover Granville
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Countywide Police | Countywide Police | 155.4150 | 100.0 PL | FMN | WPEZ832 |
Nearest trunked radio sites
Distances are measured from the center of Granville.
Mt Pisgah (BRAD31) · PA-STARNet: Pennsylvania Statewide Radio Network
RFSS 1 · Site 113 (hex 71) · NAC 945 · about 7 mi away
Control 153.5825, 153.725
Voice 154.9425
Robwood Mtn (BRAD41) · PA-STARNet: Pennsylvania Statewide Radio Network
RFSS 1 · Site 114 (hex 72) · NAC 947 · about 16 mi away
Control 151.4975, 154.935
Voice 152.775
Bloss Mtn (TIOG01) · PA-STARNet: Pennsylvania Statewide Radio Network
RFSS 3 · Site 11 (hex B) · NAC 940 · about 23 mi away
Control 152.065
Voice 152.785
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Granville?
We do not have a dispatch channel listed specifically for Granville. County-level dispatch channels in the same county: Countywide Police 155.4150 MHz (100.0 PL).