Skip to content

Pike County Police Frequencies

Pike County in Pennsylvania has 4 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 24 cities and communities below for local police departments.

About Pike County Police Frequencies

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Pike County conventional frequencies

Dispatch

AgencyDescriptionFrequency (MHz)ToneModeFCC
Countywide PoliceCountywide Police155.6250
In 154.6500
162.2 PLFMNKZQ754

Tactical

AgencyDescriptionFrequency (MHz)ToneModeFCC
Pike County SheriffPike County Sheriff – Tactical Channel155.7750162.2 PLFMNWNMQ769
Pike County SheriffEastern Pike Regional Police Department Tactical159.2100162.2 PLFMN WPHK383

Jails & Corrections

AgencyDescriptionFrequency (MHz)ToneModeFCC
Pike County SheriffCorrectional Facility155.0850
In 158.7600
CC 6 · TG 1 · SL *DMRWPGM453

Radio system sites in Pike County

Program the control channel first; your scanner finds the voice channels from it.

Milford (PIKE33) · PA-STARNet: Pennsylvania Statewide Radio Network
RFSS 3 · Site 8 (hex 8) · NAC 94A
Control 154.0325, 154.115
Voice 151.385
Dingmans Ferry (PIKE31) · PA-STARNet: Pennsylvania Statewide Radio Network
RFSS 1 · Site 105 (hex 69) · NAC 94C
Control 151.2875, 152.055
Voice 152.745
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Pike County

Common questions

What frequency do the police use in Pike County?

Dispatch channels listed for Pike County: Countywide Police 155.6250 MHz (162.2 PL).