About Reevesville Police Frequencies
- Trunked radio systems that carry law-enforcement traffic here: Palmetto 800: 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Reevesville, start with the St. George site of Palmetto 800, about 4 miles away. Its control channels: 853.8 MHz.
- 5 listed entries are marked encrypted. No scanner can decode encrypted audio.
Dorchester County channels that also cover Reevesville
Palmetto 800
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Dorchester County Sheriff | Dorchester County Sheriff – Tactical Channel | 4106 | 100a | D |
| Dorchester County Sheriff | Sheriff Administration | 4107 | 100b | D |
| Dorchester County Sheriff | Law Enforcement Roam | 4240 | 1090 | D |
5 encrypted talkgroups (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Dorchester County Sheriff | Dorchester County Sheriff – Dispatch | 4103 | 1007 | D Encrypted |
| Dorchester County Sheriff | Sheriff 4101 | 4101 | 1005 | D Encrypted |
| Dorchester County Sheriff | Sheriff 4105 | 4105 | 1009 | D Encrypted |
| Dorchester County Sheriff | DC Tactical | 4113 | 1011 | D Encrypted |
| Dorchester County Sheriff | Sheriff Patrol | 4133 | 1025 | D Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Reevesville.
St. George · Palmetto 800
RFSS 1 · Site 67 (hex 43) · NAC 1DE · about 4 mi away
Control 853.8
Voice 851.2875, 851.775, 852.4875, 853.0625, 858.2125, 859.2125, 859.7625
Canadys · Palmetto 800
RFSS 1 · Site 48 (hex 30) · NAC 1D6 · about 9 mi away
Control 859.3875, 860.3875
Voice 851.05, 851.7375, 853.375, 853.875, 856.3875, 857.3875, 858.3875
Holly Hill · Palmetto 800
RFSS 2 · Site 66 (hex 42) · NAC 1DF · about 18 mi away
Control 852.575, 852.8375, 852.925, 853.7875
Voice 851.3, 851.5625, 852.4125, 854.5125, 856.0625, 856.7125
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.