Skip to content

Gillisonville Police Frequencies

We do not have frequencies listed specifically for Gillisonville in Jasper County, South Carolina yet. Countywide channels for Jasper County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Yemassee (Palmetto 800), about 11 miles away.

About Gillisonville Police Frequencies

  • Trunked radio systems that carry law-enforcement traffic here: Palmetto 800: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Gillisonville, start with the Yemassee site of Palmetto 800, about 11 miles away. Its control channels: 853.75, 856.8625 MHz.
  • 2 listed entries are marked encrypted. No scanner can decode encrypted audio.

Jasper County channels that also cover Gillisonville

Palmetto 800

AgencyDescriptionTalkgroupHexMode
Jasper County SheriffCounty Jail664119f1D
2 encrypted talkgroups (cannot be monitored)
AgencyDescriptionTalkgroupHexMode
Jasper County SheriffJasper County Sheriff – Dispatch65011965D
Jasper County SheriffSheriff Operations65021966D

Nearest trunked radio sites

Distances are measured from the center of Gillisonville.

Yemassee · Palmetto 800
RFSS 1 · Site 49 (hex 31) · NAC 1D6 · about 11 mi away
Control 853.75, 856.8625
Voice 851.25, 851.4875, 852.45, 853.1375, 854.3375, 855.0625
Jasper · Palmetto 800
RFSS 1 · Site 50 (hex 32) · NAC 1D6 · about 12 mi away
Control 853.275, 853.8625
Voice 851.175, 851.5625, 851.9125, 852.3625, 852.8875, 854.2875
Robertville · Palmetto 800
RFSS 1 · Site 51 (hex 33) · about 14 mi away
Control 853.9625
Voice 851.0625, 851.3125, 851.7625, 852.2, 852.325, 852.825, 857.7125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.