Skip to content

Fountain Inn Police Frequencies

We do not have frequencies listed specifically for Fountain Inn in Laurens County, South Carolina yet. Countywide channels for Laurens County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Gray Court (Palmetto 800), about 6 miles away.

Fountain Inn also extends into Greenville County.

About Fountain Inn Police Frequencies

  • Trunked radio systems that carry law-enforcement traffic here: Palmetto 800: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Fountain Inn, start with the Gray Court site of Palmetto 800, about 6 miles away. Its control channels: 772.85625, 773.14375, 773.93125 MHz.

Laurens County channels that also cover Fountain Inn

Palmetto 800

AgencyDescriptionTalkgroupHexMode
Laurens County SheriffChannel 1 Dispatch45501b1bdD
Laurens County SheriffLaurens County Sheriff – Tactical Channel45502b1beD
Laurens County SheriffLaurens County Sheriff – Tactical Channel45503b1bfD
Laurens County SheriffLaurens County Sheriff – Tactical Channel45504b1c0D
Laurens County SheriffLaurens County Sheriff – Tactical Channel45505b1c1D
Laurens County SheriffLaurens County Sheriff – Tactical Channel45506b1c2D

Nearest trunked radio sites

Distances are measured from the center of Fountain Inn.

Gray Court · Palmetto 800
RFSS 2 · Site 99 (hex 63) · about 6 mi away
Control 772.85625, 773.14375, 773.93125
Voice 771.66875, 771.93125, 772.40625, 772.41875
Laurens · Palmetto 800
RFSS 2 · Site 97 (hex 61) · NAC 1DA · about 14 mi away
Control 858.8125, 859.8625, 860.8125
Voice 851.7875, 855.3375, 856.4625, 857.8125, 858.4625
Greenville County Simulcast · Palmetto 800
RFSS 2 · Site 23 (hex 17) · NAC 1DB · about 15 mi away
Control 853.2625, 853.5375, 853.75, 853.8625
Voice 851.1875, 851.875, 852.1875, 852.45, 852.55, 852.7375, 853.2125, 854.9875, 856.2375, 859.2625, 859.9625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.