About Unionville Police Frequencies
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Bedford County channels that also cover Unionville
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Bedford County Sheriff Backup | Bedford County Sheriff – Dispatch | 460.3250 In 465.3250 | 151.4 PL | FMN | WNAZ388 |
Jails & Corrections
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Bedford County Sheriff | Correctional Facility | 453.8125 In 458.8125 | FMN | WNAZ388 |
Nearest trunked radio sites
Distances are measured from the center of Unionville.
Bedford 911 (Shelbyville) · Tennessee Advanced Communications Network (TACN)
RFSS 1 · Site 39 (hex 27) · about 10 mi away
Control 851.05
Voice 851.45, 851.725, 852.6625, 852.975, 853.1875
Hoovers Gap · Tennessee Advanced Communications Network (TACN)
RFSS 1 · Site 32 (hex 20) · NAC 2AF · about 16 mi away
Control 769.25625, 769.53125
Voice 770.55625, 770.85625, 771.20625
Hawthorne Hill · Tennessee Advanced Communications Network (TACN)
RFSS 1 · Site 81 (hex 51) · NAC 2A5 · about 16 mi away
Control 769.54375, 771.04375
Voice 771.38125, 772.43125, 772.96875, 773.94375
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.