About Crook County Police Frequencies
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry law-enforcement traffic here: WyoLink: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Crook County, start with the Warren Peak site of WyoLink. Its control channels: 153.6575, 169.65 MHz.
Crook County conventional frequencies
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Crook County Sheriff | Crook County Sheriff | 158.7900 In 155.8500 | 210.7 PL | FMN | KXK433 |
Crook County trunked talkgroups
WyoLink
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Crook County Sheriff | Crook County Sheriff – Dispatch | 15106 | 3b02 | D |
Radio system sites in Crook County
Program the control channel first; your scanner finds the voice channels from it.
Warren Peak · WyoLink
RFSS 2 · Site 21 (hex 15) · NAC 1A9
Control 153.6575, 169.65
Voice 170.025, 170.8125, 172.1375
Alva · WyoLink
RFSS 2 · Site 47 (hex 2F) · NAC 1A0
Control 155.7075, 155.7975
Voice 155.8875, 155.9625, 156.195
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Crook County
Common questions
What frequency do the police use in Crook County?
Dispatch channels listed for Crook County: Crook County Sheriff 158.7900 MHz (210.7 PL).
Are Crook County police talkgroups encrypted?
None of the 1 talkgroups listed for Crook County are marked encrypted.