About Pineville Police Frequencies
- Trunked radio systems that carry law-enforcement traffic here: Arkansas Wireless Information Network (AWIN): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Pineville, start with the Wallace Knob site of Arkansas Wireless Information Network (AWIN), about 20 miles away. Its control channels: 851.225, 851.475 MHz.
Izard County channels that also cover Pineville
Arkansas Wireless Information Network (AWIN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Izard County Sheriff | Izard County Sheriff – Dispatch | 15401 | 3c29 | D |
Nearest trunked radio sites
Distances are measured from the center of Pineville.
Wallace Knob · Arkansas Wireless Information Network (AWIN)
RFSS 1 · Site 50 (hex 32) · NAC 18A · about 20 mi away
Control 851.225, 851.475
Voice 851.7625, 853.525, 853.775
City Repeater · Mountain Home Public Safety
Site 1 (hex 1) · about 21 mi away
Control 856.2625
Voice 856.7125, 857.2625, 858.2625, 859.2625
Iron Mountain · Arkansas Wireless Information Network (AWIN)
RFSS 1 · Site 48 (hex 30) · NAC 18F · about 21 mi away
Control 851.0625, 851.325
Voice 851.6, 852.45, 853.9375
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.