About Glenn Police Frequencies
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry law-enforcement traffic here: Western Area Regional Radio System Authority (WARRS): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Glenn, start with the Polk County Simulcast site of Cobb Regional Radio System, about 13 miles away. Its control channels: 770.30625, 771.35625 MHz.
Heard County channels that also cover Glenn
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Heard County Sheriff Backup | Heard County Sheriff – Dispatch (w/ Franklin Police) | 155.0700 | 141.3 PL | FMN | KNES288 |
Talk-around & Car-to-Car
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Heard County Sheriff | Heard County Sheriff – Alternate | 155.5650 | FMN | KNES288 |
Western Area Regional Radio System Authority (WARRS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Heard County Sheriff | Heard County Sheriff – Dispatch | 5102 | 13ee | D |
| Heard County Sheriff | Heard County Sheriff – Tactical Channel | 5103 | 13ef | D |
| Heard County Sheriff | Heard County Sheriff – Alternate | 5104 | 13f0 | D |
Nearest trunked radio sites
Distances are measured from the center of Glenn.
Polk County Simulcast · Cobb Regional Radio System
RFSS 1 · Site 9 (hex 9) · NAC 179 · about 13 mi away
Control 770.30625, 771.35625
Voice 772.10625, 772.48125, 772.78125
Troup Co Simulcast · Troup County Public Safety P25
Project 25 · RFSS 1 · Site 1 (hex 1) · NAC C41 · about 13 mi away
Control 856.1125, 856.5375, 856.6875, 857.0625
Voice 851.8875, 853.05, 854.0625, 854.6625, 855.2125, 855.8625
Carroll/Haralson/Heard Simulcast · Western Area Regional Radio System Authority (WARRS)
RFSS 1 · Site 3 (hex 3) · NAC 240 · about 27 mi away
Control 852.1, 852.8625
Voice 851.4, 852.125, 853.1, 853.125, 853.3625, 853.8375, 853.8875
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.