Skip to content

Unionville Police Frequencies

We do not have frequencies listed specifically for Unionville in Tift County, Georgia yet. Countywide channels for Tift County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Tifton (Tift County Public Safety P25), about 1 miles away.

About Unionville Police Frequencies

  • Trunked radio systems that carry law-enforcement traffic here: Tift County Public Safety P25 (Project 25): 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Unionville, start with the Tifton site of Tift County Public Safety P25, about 1 miles away. Its control channels: 856.9625, 857.4875 MHz.
  • 5 listed entries are marked encrypted. No scanner can decode encrypted audio.

Tift County channels that also cover Unionville

Tift County Public Safety P25

Project 25

5 encrypted talkgroups (cannot be monitored)
AgencyDescriptionTalkgroupHexMode
Abraham Baldwin Agricultural CollegePolice 1170aaD
Tift County SheriffTift County Sheriff – Dispatch10165D
Abraham Baldwin Agricultural CollegePolice 2171abD
Tift County SheriffTift County Sheriff – Tactical Channel10266D
Tift County SheriffJail1116fD

Nearest trunked radio sites

Distances are measured from the center of Unionville.

Tifton · Tift County Public Safety P25
Project 25 · RFSS 1 · Site 1 (hex 1) · NAC 671 · about 1 mi away
Control 856.9625, 857.4875
Voice 854.1875, 854.5125, 854.7875, 855.2375, 855.5875, 855.9375, 856.2625, 856.6125
Cordele · Crisp County Public Safety (P25)
Project 25 · RFSS 1 · Site 2 (hex 2) · NAC 940 · about 37 mi away
Control 856.7875, 857.3375
Voice 854.9375, 854.9625, 855.4625, 856.8125
Albany/Dougherty Co. Simulcast · Southwest Georgia Regional Radio System
RFSS 6 · Site 1 (hex 1) · NAC 8D1 · about 41 mi away
Control 856.4125, 856.7625, 857.2625
Voice 854.0125, 854.2125, 854.3875, 854.6125, 854.7125, 855.2125, 855.2875, 855.4875, 855.6125, 855.8875, 856.2125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.