About Cass Police Frequencies
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.
- Trunked radio systems that carry law-enforcement traffic here: Indiana Project Hoosier SAFE-T: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Cass, start with the Brazil site of Indiana Project Hoosier SAFE-T, about 9 miles away. Its control channels: 858.7375, 859.4625 MHz.
- 1 listed entry is marked encrypted. No scanner can decode encrypted audio.
Clay County channels that also cover Cass
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Clay County Law Enforcement | Clay County Law Enforcement – Dispatch (Standby Repeater) | 158.7300 In 156.0300 | 114.8 PL | FMN | WPHN549 |
Jails & Corrections
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Clay County Law Enforcement | Clay County Justice Center (Channel 1) | 151.3400 In 159.0600 | RAN 50 | NXDN48 | KLP506 |
| Clay County Law Enforcement | Clay County Justice Center (Channel 2) | 151.3400 In 159.0600 | 186.2 PL | FMN | KLP506 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Clay County Sheriff | Countywide Law – Dispatch (CCSO and BPD) | 10086 | 2766 | D |
| Clay County Sheriff | Secondary Dispatch | 10087 | 2767 | D |
| Clay County Sheriff | Countywide Law – Operations | 10074 | 275a | D |
| Clay County Sheriff | Operations | 10088 | 2768 | D |
| Clay County Sheriff | Operations | 10091 | 276b | D |
1 encrypted talkgroup (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Clay County Sheriff | Operations | 10092 | 276c | D Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Cass.
Brazil · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 84 (hex 54) · NAC 6BA · about 9 mi away
Control 858.7375, 859.4625
Voice 852.4375, 857.4625, 858.4625
Putnamville · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 35 (hex 23) · NAC 6B5 · about 10 mi away
Control 852.925, 853.425, 853.925
Voice 851.425, 851.925, 852.875
Spencer · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 60 (hex 3C) · NAC 6BA · about 14 mi away
Control 853.3625, 853.5625
Voice 851.9875, 852.8625, 854.0625
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.