Skip to content

Morgan Police Frequencies

We do not have frequencies listed specifically for Morgan in Owen County, Indiana yet. Countywide channels for Owen County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Spencer (Indiana Project Hoosier SAFE-T), about 6 miles away.

About Morgan Police Frequencies

  • 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry law-enforcement traffic here: Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Morgan, start with the Spencer site of Indiana Project Hoosier SAFE-T, about 6 miles away. Its control channels: 853.3625, 853.5625 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Owen County channels that also cover Morgan

Dispatch

Dispatch frequencies for Owen County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Owen County Law EnforcementOwen County Law Enforcement – Dispatch159.0900
In 153.9050
NXDN48 EncryptedWQDS297

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Owen County SheriffOwen County Sheriff – Dispatch215695441D
Owen County SheriffOperations215705442D
Owen County SheriffOperations215715443D
Owen County SheriffOperations215725444D

Nearest trunked radio sites

Distances are measured from the center of Morgan.

Spencer · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 60 (hex 3C) · NAC 6BA · about 6 mi away
Control 853.3625, 853.5625
Voice 851.9875, 852.8625, 854.0625
Putnamville · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 35 (hex 23) · NAC 6B5 · about 15 mi away
Control 852.925, 853.425, 853.925
Voice 851.425, 851.925, 852.875
Brazil · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 84 (hex 54) · NAC 6BA · about 17 mi away
Control 858.7375, 859.4625
Voice 852.4375, 857.4625, 858.4625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.