Skip to content

Wolcottville Police Frequencies

We do not have frequencies listed specifically for Wolcottville in LaGrange County, Indiana yet. Countywide channels for LaGrange County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Lagrange (Indiana Project Hoosier SAFE-T), about 8 miles away.

About Wolcottville Police Frequencies

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry law-enforcement traffic here: Indiana Project Hoosier SAFE-T: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Wolcottville, start with the Lagrange site of Indiana Project Hoosier SAFE-T, about 8 miles away. Its control channels: 853.225, 853.425 MHz.

LaGrange County channels that also cover Wolcottville

Dispatch

AgencyDescriptionFrequency (MHz)ToneModeFCC
County Law Enforcement800 MHz Back-Up155.9250
In 153.9950
151.4 PLFMNKGQ954

Talk-around & Car-to-Car

AgencyDescriptionFrequency (MHz)ToneModeFCC
County Law EnforcementDetectives45.5000FMNKSB616

Jails & Corrections

AgencyDescriptionFrequency (MHz)ToneModeFCC
County Law EnforcementCorrections155.5650151.4 PLFMNWPKR809

Indiana Project Hoosier SAFE-T

AgencyDescriptionTalkgroupHexMode
LaGrange County SheriffLaGrange County Sheriff – Dispatch108812a81D
LaGrange County SheriffLaGrange County Sheriff – Dispatch108832a83D

Nearest trunked radio sites

Distances are measured from the center of Wolcottville.

Lagrange · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 42 (hex 2A) · NAC 6BB · about 8 mi away
Control 853.225, 853.425
Voice 851.2375, 851.7125, 851.8625, 852.8625
Kendallville · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 20 (hex 14) · NAC 6BA · about 9 mi away
Control 853.9875, 857.2625
Voice 851.425, 851.9625, 852.475, 852.9
Ligonier · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 43 (hex 2B) · NAC 6B3 · about 12 mi away
Control 853.4875, 855.2375
Voice 851.05, 851.4875, 852.2, 852.5375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.